Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Microsolv Technology Corporation Tubing Holder, Knee, 90 Degree Turn. Blue. 10/PK.
This Tubing Holder, will keep your tubing "in place" when making a 90⁰ turn, which is not easy. Avoid clutter and keep your system optimized. These tubing knees will give you the right bend of your PEEK tubing, preventing close diameters, which do have a negative effect on the mechanical stability of your PEEK tubing and can cause poor internal dimensions.Best performance when used with 1/16th" PEEK Tubing but other tubing can be used as well.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PVC Reinforced, 3/8"" ID x 9/16"" OD; 100 ft
Applications: High-pressure use, food processing, and beverage handling. Characteristics: Good acid/alkali resistance and aging characteristics. White polyester yarn with orange tracer yarn embedded in a transparent PVC wall. Certification: Resin is FDA-compliant (21 CFR 177.199) and meets USDA requirements. NSF-listed (standard 51) with 3A Sanitary Standards for dairy. Temperature range: -5 to 180¿F (-21 to 82¿C). NSF temperature to 140¿F. Sterilize: Ethylene oxide.
AVANTOR MASTERFLEX (VWR LLC) PUMP TUBING,3-STOP,0.51MM ID,6
Masterflex¿ Ismatec¿ Pump Tubing, 3-Stop, Peroxide-Cured Silicone 0.51 mm ID; 6/pk
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Opaque White, 3/16"" ID x 5/16"" OD; 25 ft
Applications: General-purpose lab uses requiring high performance and long life. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Opaque white. Certification: Resin meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Peroxide-Cured Silicone Tubing, 3/8""ID x 1/2""OD, 25 ft/pack
Peroxide-Cured Silicone Tubing, 3/8"ID x 1/2"OD, 25 ft/Pk, Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications.Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent.Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP.Temperature range: ¿60 to 460¿F (¿51 to 238¿C)Sterilize: Autoclave or gamma irradiation.
Foxx Life Sciences EZBiopure Platinum Cured Silicone Transparent Tubing, 25.4mm (1") ID X 28.75mm (1 1/8'") OD, 50FT
EZBiopure Silicone Tubing is engineered for peristaltic pumps and fluid transfer in pharma and biotech applications. Its ultra-smooth bore prevents particle entrapment and ensures superior purity. Designed to meet global Food and Pharmaceutical standards.
Features
High Precision: PLC-controlled extrusion using NSF-51 certified platinum-cured silicone resin
Clean Production: Made and packaged in an ISO Class 7 cleanroom
Tight Tolerances: Laser-inspected for consistent dimensions
Compliant: Meets FDA 21 CFR, USP Class VI, USP Class 87, and ISO 10993
Clear & Odorless: Excellent transparency with no taste or odor
Biocompatible: Inert and safe for tissues and cells
Sterilizable: Compatible with autoclave, Ethylene Oxide, and gamma radiation
Certifications
USP Class VI Certificate
ISO 10993 Certificate
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life
AVANTOR MASTERFLEX (VWR LLC) Lab Tubing, Non-DEHP, 1/8""ID x 1/4""OD, 50 ft/pack
Tygon ACF00007 E-3603 Non-DEHP Nominal Lab Tubing, 1/8" ID x 1/4" OD; 50 ft/PkLong life, won¿t age or oxidize. Formulation - E3603Applications:General laboratory use.Characteristics: Long life, won¿t age or oxidize, able to bend to sharp radius curves, and easily works with fittings. Transparent.Temperature range: ¿58 to 165¿F (¿50 to 74¿C)